First step for big review

README.md

@@ -1,26 +1,24 @@
 # NAS Server
 
-This repository contains files used to set up our NAS server on a freshly installed Armbian. Target is Bullseye.
+This repository contains files used to set up our NAS server on Debian. Target is Bullseye.
 
 ### Introduction
-The SBC used has a hard drive attached (SATA), which is the storage drive. This disk should be encrypted if needed.
+The idea is to provide the following features, chosen at install:
+* a web interface for file management with [filebrowser](https://github.com/filebrowser/filebrowser)
+* a DLNA server with MiniDLNA
+* a BitTorrent client with Transmission, which comes with a server web interface
+* an VPN client with OpenVPN
+* a FTP server with vsftpd
 
-An FTP server is installed on the device, providing network access to authorized people.
+### Files
-
-### Setup
-##### Installation
-* `setup.sh` is a script automating the installation and configuration of required software.
-* `variables.conf.template` contains examples variables definitions, and should be copied locally to `variables.conf`
-  (with any required modifications).
-* `srv-nas.mount` is a systemd unit which, when started, will try to mount DATA drive.
-##### DL server
 * `transmission-daemon.service` is a replacement for default Transmission service file, with more settings.
 * `transmission-vpn.sh` is a script which checks if a VPN connection is active and stops Transmission otherwise.
 * `transmission-vpn.service` is a service unit for above script.
 * `transmission-vpn.timer` is a timer which runs regularly above script.
 * `variables.conf.template` contains examples variables definitions, and should be copied locally to `variables.conf`
   (with any required modifications).
+##### Installation
 * `install.sh` script copies Systemd units to their destination, with correct values.
 
 ### TODO
-* Add TLS cert generation to DL setup
+* RAS

setup.sh

@@ -81,9 +81,6 @@ set_vsftpd() {
   echo "nascrypt /dev/sda none noauto" >> /etc/crypttab
   sed -i -e "s/#write_enable=YES/write_enable=YES/g" /etc/vsftpd.conf
   sed -i -e "s/#utf8_filesystem=YES/utf8_filesystem=YES/g" /etc/vsftpd.conf
-  # The two lines below set up TLS wrapping with a self-signed certificate, which causes issues with clients
-  #sed -i -e "s/ssl_enable=NO/ssl_enable=YES/g" /etc/vsftpd.conf
-  #openssl req -x509 -nodes -days 7300 -newkey rsa:2048 -keyout /etc/ssl/private/ssl-cert-snakeoil.key -out /etc/ssl/certs/ssl-cert-snakeoil.pem -subj "/C=/ST=/L=/O=/OU=/CN="
 }
 
 # Only run if the user is root

srv-nas.mount

@@ -1,10 +0,0 @@
-[Unit]
-Description=Mount NAS Volume
-# Below Requisite could be a Wants
-Wants=systemd-cryptsetup@nascrypt.service
-After=systemd-cryptsetup@nascrypt.service
-
-[Mount]
-What=/dev/mapper/nascrypt
-Where=/srv/nas
-Options=rw,relatime

variables.conf.template

@@ -2,6 +2,7 @@
 
 # Copy this file as variables.conf, with the correct values
 
-dl_server="no"
+filebrowser="yes"
+dlna_server="yes"
+dl_server="yes"
 ftp_server="no"
-upnp_server="no"