Add right type to transmission-vpn.service

README.md

@@ -1,26 +1,39 @@
 # NAS Server
 
-This repository contains files used to set up our NAS server on a freshly installed Armbian. Target is Bullseye.
+This repository contains files used to set up our NAS server on Debian. Target is Bullseye.
 
 ### Introduction
-The SBC used has a hard drive attached (SATA), which is the storage drive. This disk should be encrypted if needed.
+The idea is to provide the following features, chosen at install:
+* a web interface for file management with [File Browser](https://github.com/filebrowser/filebrowser);
+* a DLNA server with MiniDLNA;
+* a BitTorrent client with Transmission, which comes with a server web interface;
+* a VPN client with OpenVPN;
+* a FTP server with vsftpd.
+In addition, Nginx is used to provide HTTPS proxy to File Browser and Transmission
 
-An FTP server is installed on the device, providing network access to authorized people.
+### Requirements
+The following list of packages must be installed manually (depending on which features are needed):
+```transmission-daemon minidlna openvpn nginx vsftpd```
+File Browser must be installed manually at `/usr/local/bin/filebrowser`.
 
-### Setup
+A "NAS user" should be defined, owner of the NAS root directory: This user shall run some of above services.
-##### Installation
+
-* `setup.sh` is a script automating the installation and configuration of required software.
+If using Transmission, you need to set an OpenVPN connection config as `vpn`.
-* `variables.conf.template` contains examples variables definitions, and should be copied locally to `variables.conf`
+
-  (with any required modifications).
+### File Browser init
-* `srv-nas.mount` is a systemd unit which, when started, will try to mount DATA drive.
+If using File Browser, it should be initiated first:
-##### DL server
+```
-* `transmission-daemon.service` is a replacement for default Transmission service file, with more settings.
+sudo -u <nas-user> filebrowser -d <nas>/filebrowser.db --username <admin>
+```
+
+### Files
 * `transmission-vpn.sh` is a script which checks if a VPN connection is active and stops Transmission otherwise.
-* `transmission-vpn.service` is a service unit for above script.
+* `variables.conf.template` contains examples of variables definitions, and should be copied locally to `variables.conf`
-* `transmission-vpn.timer` is a timer which runs regularly above script.
-* `variables.conf.template` contains examples variables definitions, and should be copied locally to `variables.conf`
   (with any required modifications).
+* `systemd-templates/` contains Systemd units templates for all the services.
+* `nginx-blocks/` contains Nginx configuration blocks.
+##### Installation
 * `install.sh` script copies Systemd units to their destination, with correct values.
 
 ### TODO
-* Add TLS cert generation to DL setup
+* RAS

dl-server/install.sh

@@ -1,26 +0,0 @@
-#!/usr/bin/env bash
-
-run_directory=$(dirname "$0")
-
-source "$run_directory/variables.conf"
-
-if [ -f $run_directory/.disabled ]; then
-  echo "Installation is disabled. Exiting..."
-  exit 0
-fi
-
-echo "Copying Systemd units to system directory..."
-sudo cp $run_directory/transmission-daemon.service /etc/systemd/system/
-sudo sed -i -e "s/PH_AUTHORIZED_ADDRESSES/$authorized_ips/g" /etc/systemd/system/transmission-daemon.service
-sudo sed -i -e "s/PH_USER/$user/g" /etc/systemd/system/transmission-daemon.service
-sudo sed -i -e "s/PH_PASSWORD/$password/g" /etc/systemd/system/transmission-daemon.service
-sudo sed -i -e "s:PH_DL_LOCATION:$dl_location:g" /etc/systemd/system/transmission-daemon.service
-sudo cp $run_directory/transmission-vpn.service /etc/systemd/system/
-sudo sed -i -e "s:PH_DIRECTORY:$run_directory:g" /etc/systemd/system/transmission-vpn.service
-sudo cp $run_directory/transmission-vpn.timer /etc/systemd/system/
-
-echo "Reloading Systemd..."
-sudo systemctl daemon-reload
-
-echo "Finished install. Exiting..."
-exit 0

dl-server/variables.conf.template

@@ -1,9 +0,0 @@
-#!/usr/bin/env bash
-
-# Copy this file as variables.conf, with the correct values
-
-real_ip="" # for VPN check
-authorized_ips="" # for transmission web interface
-user="" # user for transmission web interface
-password="" # password for transmission web interface
-dl_location="" # location of Downloads directory

install.sh

@@ -0,0 +1,76 @@
+#!/usr/bin/env bash
+
+run_directory=$(dirname $(readlink -f "$0"))
+user=$(whoami)
+
+source "$run_directory/variables.conf"
+
+if [ -f $run_directory/.disabled ]; then
+  echo "Installation is disabled. Exiting..."
+  exit 0
+fi
+
+if [[ $user != 'root' ]]; then
+  sudo="sudo"
+else
+  sudo=""
+fi
+
+echo "Copying Systemd units to system directory..."
+
+if [ ! -f $crt_path ]; then
+  $sudo openssl req -newkey rsa:4096 -x509 -sha256 -days 999 -nodes -out $crt_path -keyout $key_path \
+    -subj "/C=/ST=/L=/O=/OU=/CN="
+fi
+if [ -d /etc/nginx ]; then
+  $sudo cp $run_directory/nginx-blocks/0-http-redirect /etc/nginx/sites-available/0-http-redirect
+  $sudo ln -sf ../sites-available/0-http-redirect /etc/nginx/sites-enabled/0-http-redirect
+fi
+
+if [ "$filebrowser" = "yes" ]; then
+  $sudo cp $run_directory/systemd-templates/filebrowser.service /etc/systemd/system/
+  $sudo sed -i -e "s/PH_NAS_USER/$nas_user/g" /etc/systemd/system/filebrowser.service
+  $sudo sed -i -e "s:PH_NAS_DIRECTORY:$nas_location:g" /etc/systemd/system/filebrowser.service
+  $sudo cp $run_directory/nginx-blocks/filebrowser /etc/nginx/sites-available/filebrowser
+  $sudo sed -i -e "s/PH_SRVNAME/$filebrowser_server_name/g" /etc/nginx/sites-available/filebrowser
+  $sudo sed -i -e "s:PH_CRT:$crt_path:g" /etc/nginx/sites-available/filebrowser
+  $sudo sed -i -e "s:PH_KEY:$key_path:g" /etc/nginx/sites-available/filebrowser
+  $sudo ln -sf ../sites-available/filebrowser /etc/nginx/sites-enabled/filebrowser
+fi
+
+if [ "$dlna_server" = "yes" ]; then
+  $sudo sed -i -e "s:media_dir=/var/lib/minidlna:media_dir=$nas_location:g" /etc/minidlna.conf
+  $sudo sed -i -e "s:#friendly_name=:friendly_name=$(hostname -s):g" /etc/minidlna.conf
+fi
+
+if [ "$dl_server" = "yes" ]; then
+  $sudo cp $run_directory/systemd-templates/transmission-daemon.service /etc/systemd/system/
+  $sudo sed -i -e "s/PH_NAS_USER/$nas_user/g" /etc/systemd/system/transmission-daemon.service
+  $sudo sed -i -e "s:PH_DIRECTORY:$run_directory:g" /etc/systemd/system/transmission-daemon.service
+  $sudo sed -i -e "s/PH_AUTHORIZED_ADDRESSES/$authorized_ips/g" /etc/systemd/system/transmission-daemon.service
+  $sudo sed -i -e "s/PH_USER/$user/g" /etc/systemd/system/transmission-daemon.service
+  $sudo sed -i -e "s/PH_PASSWORD/$password/g" /etc/systemd/system/transmission-daemon.service
+  $sudo sed -i -e "s:PH_DL_LOCATION:$dl_location:g" /etc/systemd/system/transmission-daemon.service
+  $sudo cp $run_directory/systemd-templates/transmission-daemon.timer /etc/systemd/system/
+  $sudo cp $run_directory/systemd-templates/transmission-vpn.service /etc/systemd/system/
+  $sudo sed -i -e "s:PH_DIRECTORY:$run_directory:g" /etc/systemd/system/transmission-vpn.service
+  $sudo cp $run_directory/systemd-templates/transmission-vpn.timer /etc/systemd/system/
+  $sudo cp $run_directory/nginx-blocks/transmission /etc/nginx/sites-available/transmission
+  $sudo sed -i -e "s/PH_SRVNAME/$transmission_server_name/g" /etc/nginx/sites-available/transmission
+  $sudo sed -i -e "s:PH_CRT:$crt_path:g" /etc/nginx/sites-available/transmission
+  $sudo sed -i -e "s:PH_KEY:$key_path:g" /etc/nginx/sites-available/transmission
+  $sudo ln -sf ../sites-available/transmission /etc/nginx/sites-enabled/transmission
+  $sudo systemctl disable transmission-daemon.service
+  $sudo systemctl enable transmission-daemon.timer
+fi
+
+if [ "$ftp_server" = "yes" ]; then
+  $sudo sed -i -e "s/#write_enable=YES/write_enable=YES/g" /etc/vsftpd.conf
+  $sudo sed -i -e "s/#utf8_filesystem=YES/utf8_filesystem=YES/g" /etc/vsftpd.conf
+fi
+
+echo "Reloading Systemd..."
+sudo systemctl daemon-reload
+
+echo "Finished install. Exiting..."
+exit 0

nginx-blocks/0-http-redirect

@@ -0,0 +1,4 @@
+server {
+  listen  80;
+  return  301 https://$host$request_uri;
+}

nginx-blocks/filebrowser

@@ -0,0 +1,12 @@
+server {
+  listen              443 ssl;
+  server_name         PH_SRVNAME;
+
+  ssl_certificate     PH_CRT;
+  ssl_certificate_key PH_KEY;
+
+  location / {
+    proxy_pass                            http://127.0.0.1:8080;
+    add_header Strict-Transport-Security  "max-age=31536000; includeSubDomains";
+  }
+}

nginx-blocks/transmission

@@ -0,0 +1,12 @@
+server {
+  listen              443 ssl;
+  server_name         PH_SRVNAME;
+
+  ssl_certificate     PH_CRT;
+  ssl_certificate_key PH_KEY;
+
+  location / {
+    proxy_pass                            http://127.0.0.1:9091;
+    add_header Strict-Transport-Security  "max-age=31536000; includeSubDomains";
+  }
+}

setup.sh

@@ -1,140 +0,0 @@
-#!/usr/bin/env bash
-
-# The purpose of this script is to setup our NAS server on a blank Armbian.
-# This script is to be run as root.
-
-# (Keep in mind that default root password is 1234)
-# Flash SBC's SD with Armbian and copy this script as well as conf-sync.sh to /root
-
-# YOU SHOULD REMOVE THIS SCRIPT AFTER SETUP
-
-source "$run_directory/variables.conf"
-
-# Functions
-init() {
-  echo "Starting initialization"
-  echo $fqdn > /etc/hostname
-  localectl set-keymap $keymap
-  timedatectl set-timezone $timezone
-  systemctl disable apt-daily-upgrade.timer
-}
-
-install_packages() {
-  echo "Starting packages installation"
-  sed -i -e "s/$deb_apt_default_repo/$deb_apt_repo/g" /etc/apt/sources.list
-  apt update
-  apt upgrade -y
-  packages_to_install="vim tree tmux neofetch cryptsetup clevis clevis-luks clevis-systemd"
-  if [ "$dl_server" = "yes" ]; then
-    packages_to_install+=" openvpn transmission-daemon"
-  fi
-  if [ "$upnp_server" = "yes" ]; then
-    packages_to_install+=" minidlna"
-  fi
-  if [ "$ftp_server" = "yes" ]; then
-    packages_to_install+=" vsftpd"
-  fi
-  apt install -y $packages_to_install
-}
-
-add_users() {
-  echo "Adding users"
-  useradd -U -G sudo -m -s /bin/bash $user
-  chmod 700 /home/$user
-  echo "Let's define a password for $user as we are about to run sudo with it. It can of course be changed after setup."
-  passwd $user
-}
-
-get_sync() {
-  echo "Getting and deploying sync configuration"
-  sudo -H -u $user mkdir $sync_directory_path
-  sudo -H -u $user git clone https://gitea.kto.black/adminconf/rcs-general.git $sync_directory_path/rcs-general
-  sudo -H -u $user $sync_directory_path/rcs-general/install.sh
-  sudo -H -u $user git clone https://gitea.kto.black/adminconf/conf-sync.git $sync_directory_path/conf-sync
-  sudo -H -u $user cp $sync_directory_path/conf-sync/variables.conf.template \
-    $sync_directory_path/conf-sync/variables.conf
-  sudo -H -u $user sed -i -e "s/\"desktop\"/\"server\"/g" $sync_directory_path/conf-sync/variables.conf
-  sudo -H -u $user $sync_directory_path/conf-sync/install.sh
-  sudo -H -u $user git clone https://gitea.kto.black/adminconf/nas-server.git $sync_directory_path/nas-server
-}
-
-ssh_pubkey() {
-  echo "Getting SSH public key"
-  sudo -H -u $user mkdir /home/$user/.ssh
-  sudo -H -u $user wget -P /home/$user/.ssh $remote_pubkey_location/$remote_pubkey
-  sudo -H -u $user mv /home/$user/.ssh/$remote_pubkey /home/$user/.ssh/authorized_keys
-}
-
-set_sshd_conf() {
-  echo "Editing OpenSSH daemon config..."
-  sed -i -e "s/#PasswordAuthentication yes/PasswordAuthentication no/g" /etc/ssh/sshd_config
-  sed -i -e "s/PermitRootLogin yes/PermitRootLogin no/g" /etc/ssh/sshd_config
-}
-
-set_vsftpd() {
-  if [ "$ftp_server" != "yes" ]; then
-    return 0
-  fi
-  echo "Setting vsftpd config"
-  mkdir $nas_root
-  chown $user:users $nas_root
-  echo "nascrypt /dev/sda none noauto" >> /etc/crypttab
-  sed -i -e "s/#write_enable=YES/write_enable=YES/g" /etc/vsftpd.conf
-  sed -i -e "s/#utf8_filesystem=YES/utf8_filesystem=YES/g" /etc/vsftpd.conf
-  # The two lines below set up TLS wrapping with a self-signed certificate, which causes issues with clients
-  #sed -i -e "s/ssl_enable=NO/ssl_enable=YES/g" /etc/vsftpd.conf
-  #openssl req -x509 -nodes -days 7300 -newkey rsa:2048 -keyout /etc/ssl/private/ssl-cert-snakeoil.key -out /etc/ssl/certs/ssl-cert-snakeoil.pem -subj "/C=/ST=/L=/O=/OU=/CN="
-}
-
-# Only run if the user is root
-if [[ $USER != 'root' ]] ; then
-  echo "You must run this script as root!"
-  exit 1
-fi
-
-run_directory_path=$(pwd)
-
-# Set parameters
-fqdn='hk1.jab.kto.black'
-keymap='fr'
-timezone='Europe/Paris'
-deb_apt_default_repo='deb.debian.org' # TODO check
-deb_apt_repo='ftp.fr.debian.org'
-user='alex'
-sync_directory_path="/home/$user/.sync"
-systemd_units_path='/etc/systemd/system'
-remote_pubkey_location='https://keys.kto.black'
-remote_pubkey='home.pub'
-nas_root='/srv/nas'
-
-# Main process
-# You should comment below what you do not want to happen
-init
-install_packages
-add_users
-get_sync
-ssh_pubkey
-set_sshd_conf
-set_vsftpd
-
-echo ""
-echo "We're all good here!"
-echo "You should now:"
-echo "* set $user's password"
-echo "* lock root account"
-echo "* remove $run_directory_path content"
-if [ "$dl_server" = "yes" ]; then
-  echo "* get the OpenVPN configuration file, move it to /etc/openvpn/client/vpn.conf"
-  echo "  * and add at \`auth-user-pass\`: auth.txt"
-  echo "  * create said auth.txt with VPN login and password (on two rows)"
-fi
-echo "* reboot the SBC"
-echo "And perhaps:"
-echo "* set htop at your convenience"
-echo "* remove password for sudo" # TODO we should automate that, with a flag
-echo "* use below commands to edit SSH config:"
-echo "    sed -i 's/PermitRootLogin yes/PermitRootLogin no/' /etc/ssh/sshd_config"
-echo "    sed -i 's/#PasswordAuthentication yes/PasswordAuthentication no/' /etc/ssh/sshd_config"
-echo "* register an encrypted volume to a tang server"
-
-exit 0

srv-nas.mount

@@ -1,10 +0,0 @@
-[Unit]
-Description=Mount NAS Volume
-# Below Requisite could be a Wants
-Wants=systemd-cryptsetup@nascrypt.service
-After=systemd-cryptsetup@nascrypt.service
-
-[Mount]
-What=/dev/mapper/nascrypt
-Where=/srv/nas
-Options=rw,relatime

systemd-templates/filebrowser.service

@@ -0,0 +1,10 @@
+[Unit]
+Description=File Browser web interface
+
+[Service]
+User=PH_NAS_USER
+Type=simple
+ExecStart=/usr/local/bin/filebrowser -d PH_NAS_DIRECTORY/PH_NAS_USER/filebrowser.db -r PH_NAS_DIRECTORY
+
+[Install]
+WantedBy=default.target

systemd-templates/transmission-daemon.service

@@ -1,16 +1,16 @@
 [Unit]
 Description=Transmission BitTorrent Daemon (KTO)
-Wants=transmission-vpn.service
 BindsTo=transmission-vpn.timer
 After=network.target transmission-vpn.timer
 
 [Service]
-User=debian-transmission
+User=PH_NAS_USER
 Type=notify
+ExecStartPre=PH_DIRECTORY/transmission-vpn.sh
 ExecStart=/usr/bin/transmission-daemon -f --log-error -a PH_AUTHORIZED_ADDRESSES -C -t -u PH_USER -v PH_PASSWORD -w PH_DL_LOCATION
 ExecStop=/bin/kill -s STOP $MAINPID
 ExecReload=/bin/kill -s HUP $MAINPID
 NoNewPrivileges=true
 
 [Install]
-WantedBy=multi-user.target
+WantedBy=default.target

systemd-templates/transmission-daemon.timer

@@ -0,0 +1,8 @@
+[Unit]
+Description=Wait 1m before starting Transmission at boot
+
+[Timer]
+OnBootSec=1m
+
+[Install]
+WantedBy=default.target

systemd-templates/transmission-vpn.service

@@ -3,6 +3,7 @@ Description=Make sure VPN is active for Transmission
 OnFailure=transmission-daemon.service
 
 [Service]
+Type=oneshot
 ExecStart=PH_DIRECTORY/transmission-vpn.sh
 
 [Install]

systemd-templates/transmission-vpn.timer

@@ -3,7 +3,7 @@ Description=Regular check for VPN while Transmission is running
 BindsTo=transmission-daemon.service
 
 [Timer]
-OnUnitInactiveSec=10m
+OnUnitInactiveSec=5m
 
 [Install]
 WantedBy=default.target

transmission-vpn.sh

@@ -5,11 +5,13 @@
     # This will be achieved with a timer started and stopped with transmission service
   # On transmission starting
 # When the script exits with failure, associated service should try to start transmission service
+  # NOTE not on transmission starting, as this script is not run by its service; it means there's an issue with VPN at
+  # start, and this should be looked at manually
 # Thus this script will be executed again
   # We can enter an infinite loop, but this will effectively prevent transmission from connecting
 # If both services are stopped, this script will never be run by error
 
-run_directory=$(dirname "$0")
+run_directory=$(dirname $(readlink -f "$0"))
 source "$run_directory/variables.conf"
 
 # Parameters

variables.conf.template

@@ -2,6 +2,29 @@
 
 # Copy this file as variables.conf, with the correct values
 
-dl_server="no"
+nas_location=""
+nas_user=""
+
+# Paths to X509 certificate and key
+# If they do not exist, they will be created as a self-singed certificate
+crt_path="/etc/ssl/cert.crt"
+key_path="/etc/ssl/cert.key"
+
+# Set up File Browser
+filebrowser="yes"
+filebrowser_server_name="files.$(hostname)"
+
+# Set up MiniDLNA
+dlna_server="yes"
+
+# Set up Transmission and OpenVPN
+dl_server="yes"
+transmission_server_name="dl.$(hostname)"
+real_ip="" # for VPN check
+authorized_ips="" # for transmission web interface
+user="" # user for transmission web interface
+password="" # password for transmission web interface
+dl_location="" # location of Downloads directory
+
+# Set up vsftpd
 ftp_server="no"
-upnp_server="no"